Craft Beetle


CRAFTS

If I made it, painted it, crafted it, then it will be here. Sometimes I craft practical things, other times it they are purely decorative. Isn't that usually how it goes?

Tri-Pot Stand

Sometimes you browse IKEA and find something you like but you don't love the price. That was the case for me when I found the SATSUMAS plant stand, so I fired up SolidWorks and a few minutes later I had the parts designed and ready to print. The total project cost ended up being 28% of the IKEA version and the assembly process was just as easy.

Bill Of Materials

3x Plates $2.18 ea
3x Spacers $0.56 ea
1" x 72" Dowel $7.78 ea
12x Screws $5.97 per 100 pcs
Total: $16.72

Collaborative Paintings

A good college friend and I broke out the paint and canvas and got to painting together. She is incredibly talented where as I am nearly artistically bankrupt but we had a really fun time. We painted on the same canvas simultaneously which can be seen on one painting as a completely different texture on one side relative to the other, and on the other painting as swirls vs feathers. These paintings hang proudly in my living room.

Coffee Pod Holder

I have a coffee maker at work but I prefer to clean and fill my coffee pods at home so my coffee grounds can go into my compost. So I take my coffee pods back and forth from work. The coffee pods sometimes spill during transport and are generally inconvenient to carry. So I designed a coffee pod holder that uses four holding plates with a threaded rod and nuts holding them together. When closed it clamps down on all the pods, and when I want to access a pod I just unscrew the plate above a few turns.

Princess

A commission painting for a friend. It was a really fun painting process because I got to do a nice gradient and speckle some stars. I don't think I would have painted a princess miniature if it wasn't for someone else.

Coffee Pod Holder

iPhone Shade

I was commissioned to design and print an iPhone sun shade for a client who worked outside. They wanted the camera to remain exposed and for the shade to be easily put on and removed. This was my solution and it seemed to work well for them.

Coffee Pod Holder

Vecna

I painted this resin printed Vecna mini as a commission for a friend. It was a relatively straight forward painting process, thought I had to be careful not to break the fragile ribbons and to match the color of the original Vecna art.

Coffee Pod Holder

3D Scanned Man and Scanner

A client gave me a 3D scan of the man and of the 3D scanner he is wearing. I then cleaned up the models in Blender, almost completely remodeling the scanner, and printed them on my resin printer. I then painted them. They were very happy with the result and I got to try out new techniques and flex my modeling skills. The skin was definitely the hardest part.

Stormcast Eternal

This was my submission into a local game shop's painting competition. I had a really fun time painting it and I made a video of the whole process.

Stacked Container Slums

The people of Necromunda have to live somewhere. This is one of those places. Stacked shipping containers with all the wear and tear of the future slums. One of other inspirations for this design was The Ascent.

Deathwatch Watch Master

I first got into Warhammer 40K to play Killteam with one of my best friends. I figured what better faction than the Deathwatch, the originators of the Killteams. They looked super cool and were very customizable so I picked up a box and got to it. What I had failed to understand was that I did not have an infinite budget, nor did I have infinite time to paint, learn, and play. I now have a lot of cool minis that I do nothing with. This guy turned out pretty good.

Industrial Terrain

I built this terrain out of bit and bobs and junk. A soda can, some bendy straws, nuts, bolts, tubes, and wires all tied together with a muddy, rusty paint job. Some minis for scale. The inquisitor on top is a kitbash of a bunch of parts I felt went together well.

Dragon Diorama

This was the very first model I airbrushed. One of my best friends came over and lent me his and showed me how to use it. I didn't do anything impressive but I loved how fast it painted and how even the coats were. Needless to say I bought my own not too long after.

Krieg Soldier

He's just a happy boy marching towards his assured death.

Aren't we all?

Necromunda Gang

I hacked these miniatures together on Blender from parts I bought and some I found for free on various sites. The three animal headed gangers are directly inspired by Mutant Year Zero: Road to Eden. I really enjoyed making them unique.

Knolls

Knolls are one of my favorite DnD beasts. I know the lore has them classed as inherently evil but I reject the concept of "inherently evil creatures". These are just some irritated hyenas and we can befriend them if we're cool.

Village Pillage

I spent a day in the aftermath of a hurricane, while the power and internet were out and the generator was running, making this diorama with one of my best friends. He did an absolutely amazing job painting the miniatures while I hacked together the destroyed building they're pillaging.

Gridfinity Loupe Holder

I have some magnifying loupes that I would like to add to my gridfinity plate. I have looked online and found existing designs, but they all put the loupes in right side up or upside down. They’re good designs but they can be improved. The current designs make it difficult to impossible to see the magnification of the loupe printed on the side, and they leave the lenses exposed. My improved design has the loupes on their side to show the magnification label, and has raised walls that protect the lenses without impeding access. There’s also finger recesses to make the loupes easier to grab. This design is available for download for free at my Thangs page.

Gridfinity Cat Fountain

My cat is a goofy guy who recently only drinks from the sink. He also can’t seem to figure out how to do it without getting soaked. This cat water fountain is a removable sink attachment that makes it easier for him to drink. Fountain is the product of many iterations. This trial and error honed in on the sink’s irregular geometry and optimized material usage. I use Fountain every day and it is much better than not using it, but it can be improved. Part of the wall has broken (though still works) due to being too thin. The O-ring fits poorly, moves around, and water leaks through.

Gridfinity Loupe Holder

Bell Tower

This bell tower was my first attempt at making 40K terrain and creating dioramas in general. I learned a lot from the experience. I think it turned out pretty well all things considered.

Rucksack

I designed and made this rucksack in my junior year of highschool and it has served me well for many years. I used it daily through the end of high school, all of college, and for years at work, some 7 years in total. I recently purchased a Goruck GR1 for travel and work and I am very happy with it, but this rucksack is still my go-to for outings to the beach or event near home. I made it with real canvas and Palestinian suede. The inner lining is cotton. I hand stitched it all while binge watching Narcos.

Following Ibn Battuta

I wrote this historical fiction travel diary following the footsteps of the famous traveler Ibn Battuta for my high school sophomore world history class. The teacher only asked for a regular report, typed out and printed MLA style but he also didn't say I couldn't be creative with the presentation. You can read it below.

Avatar: The Last Airbender Playing Cards

Many years ago I made a set of Avatar: The Last Airbender playing cards. Now, after watching the first season of the live action show, which was very good by the way, I decided to share these cards with everyone.

If you print them and post them make sure to tag me!

Borderlands Psycho Mask

I really enjoyed Borderlands 2 and so when the time came to decide what I wanted my first ever cosplay to be, the Borderlands psycho won out. The outfit consisted of pants I dyed orange and painted, boots I borrowed from a neighbor, various knee/shoulder/elbow pads that I added spikes to, and this hand made mask, all covered in hand drawn cell-shading lines, including my bare torso. I made the mask out of air dry clay over a paper and glue base, the lenses are from cheap plastic sunglasses, the respirator is a computer fan, and I added leather straps to the front and to make it wearable.

I had a great time at the convention, spent quality time with my friends, and ended up winning an MTD draft, pulling a very rare card and selling it, which made me back my entry ticket cost.

20250201 110112


© 2024-2026 Craft Beetle | All rights reserved

craftbeetle@protonmail.com | RSS